Product description Traxxas Differential output yokes, heavy duty (2)/ screw pin (2) Pair of heavy-duty differential output yokes with screw pins (2) Check the owner's manual of your vehicle to confirm fitment and proper usage of this product before purchase....

TRX-6815R TRAXXAS BODY MOUNT (1)/ BODY MOUNT POST (2)/ BODY POST EXTENSIONS (2) (FRONT OR REAR) Product description Traxxas Body mount (1)/ body mount post (2)/ body post extensions (2) (front or rear) Body mount includes body mount posts (2)...

LED lightbar (chrome, 4 clear lights)

TRAXXAS 6757 REBUILD KIT STEEL-SPLINED CV TRA6757

TRX-6747 TRAXXAS GEAR, 11-T PINION (32-P) (STEEL)/ SET SCREW Traxxas Gear, 11-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw 11-tooth pinion gear (32-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the...

Product description Traxxas Sensor, temperature and voltage (long) The temperature/voltage sensor plugs directly into your TQi™ receiver and power tap to provide real-time motor temperature and battery voltage data while you drive. Real-time telemetry requires a TQi radio with Traxxas...

TRAXXAS 34-T PINION GEAR WITH 1.0 METRIC PITCH AND 20 DEGREE PRESSURE ANGLE FITS 5MM SHAFT/SET SCREW Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles This product is made from high...

Easy to install replacement parts High quality construction Engineered specifically for Traxxas vehicles

Includes battery post, foam spacer, and angled body clip Allows for installation of taller, multi-cell batteries Fits 1/10 Scale 2WD Slash models, both standard and LCG-chassis and standard-chassis 4WD Slashes (does not fit LCG 4x4 chassis) Use Traxxas stock and...

Product description Traxxas Chassis brace, rear (fits E-Revo®/Summit 1:10) Reinforce your chassis with this blue-anodized aluminum rear chassis brace. Check the owner's manual of your vehicle to confirm fitment and proper usage of this product before purchase. Specifications Article number:...

TRAXXAS 5576R ANACONDA TIRES AND ALL-STAR WHEELS REAR JATO 3.3 Anaconda street tires with foam inserts pre-glued on 2.8" All-Star Chrome Wheels (sold in pairs) Specially formulated tire compound provides exceptional wear and sticky traction Mounted and pre-glued on futuristic...

Product description Traxxas Slipper pressure plate & hub (aluminum alloy.) Replacement standard-duty aluminum alloy pressure plate and hub. Use with 5552X standard-duty clutch rebuild kit. Check the owner's manual of your vehicle to confirm fitment and proper usage of this...

TRX-5462 Rebuild kit, GTR shock (x-rings, bump stops, bladders, all pistons, piston nuts, shock rod ends) renews 2 shocks Product description The Traxxas GTR shock rebuild kit includes the parts needed to refresh two GTR Shocks. The package includes silicone...

Traxxas Steel Drive Shaft Revo/T-Maxx w/OptiDrive (4) Features: Steel construction Can be used to replace a bent or damaged front center driveshaft Assembled with inner & outer dust boots Includes: Four steel constant-velocity driveshafts Specs: Length: 7" (177.8mm) between canter...

TRX-5378X Traxxas Pivot ball caps (4)/ dust boots, rubber (4)/ dust plugs, rubber (4)/ dust boot retainers, black (4), blue (4) (2 pkgs. req. to complete truck) Check the owner's manual of your vehicle to confirm fitment and proper usage...

Traxxas 5334R Axle Carrier (2) Revo (use with larger 6x13mm ball bearings) Bearing adapters (for 6x12mm ball bearings) (2) Dust boot retainers (4) Replacement part for these models: Revo 3.3 Revo 2.5 E-Revo 1.0 Slayer® Pro 4X4 Summit Accessory part...

Revo's linkage based suspension requires different push rod assemblies depending upon which rockers are used. Strong, 7075-T6 aluminum versions of each are available to decrease the total weight of the truck by 31 grams. Rod ends are already installed making...

Traxxas Steel Pushrod Revo (2) This is the pair of Steel Pushrods for the Traxxas Revo. Features: Metal pushrod construction Plastic rod ends with hollow ball ends Includes: (2) pushrods (4) rod ends (4) hollow ball ends Specs: Pushrod length...

TRX-5314 TRAXXAS BODY MOUNTS, FRONT & REAR/ BODY MOUNT POSTS, FRONT & REAR/ 2.5X18MM SCREW PINS (4)/ 4X10MM BCS (1) Product description Traxxas front and rear body mounts and body posts with 2.5x18 mm screw pins (4) and 4x10 mm...

Starter motor. Includes pinion gear and motor bushing. For EZ-Start 2

TRX-5261 TRAXXAS AIR FILTER INSERTS, FOAM (3) (PRE-OILED) (TRX® 2.5, 2.5R, 3.3) Product description Traxxas Air filter inserts, foam (3) (pre-oiled) (TRX® 2.5, 2.5R, 3.3) Pack of three replacement pre-oiled air filter inserts for TRX® 2.5, 2.5R, and 3.3 engines....

Machined Aluminum Ball Bearing Wheels with Rubber Tires: Traxxas now offers an impressive set of red and blue-anodized machined aluminum wheelie bar wheels with rubber tires. The precision 6061-T6 aluminum wheels feature a stunning anodized finish and they ride on...

Product description Traxxas Ball bearing, black rubber sealed (20x27x4mm) (2) Pair of 20x27x4 mm black rubber seal ball bearings. Original Internal bearing for original X-Maxx axle carriers and steering blocks. As a running production change, the X-Maxx carriers were re-designed...