Traxxas Rear Differential Pinion gear (12/47 ratio) (rear) (requires #10757 with either #10758 or 10760) Use this rear differential pinion gear when installing the shorter 10757-series center driveshaft along with the optional 10758 slipper clutch or 10760-series center differential in...

TRX-4M LOW RANGE GEAR SET (CRAWL) Traxxas TRX-4m Transmission Low Range Gear set (crawl)(40.3:1 reduction ratio)/ pinion gear, 11-tooth Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

Traxxas TRX-4m Gears, axle (metal, front & rear) Give your TRX-4M™ the ultimate drivetrain upgrade with these front and rear metal axle gears. Metal axle gears are the perfect companion for the 9756 hardened-steel axle set. Accessory part for these...

Servo gear set, metal (for 2070, 2075, 2075X servos) Replacement gear set for 2075X metal gear servo. Gears may also be used in 2075 and 2075R servos (must swap all gears).

TRX-2382 Traxxas Planetary gears (4)/ planet shafts (4)/ sun gears (2)/sun gear alignment shaft (1) all hardened steel Traxxas Planetary gears (4)/ planet shafts (4)/ sun gears (2)/sun gear alignment shaft (1) all hardened steel Replacement hardened-steel internal gears for...

TRX-7079 TRAXXAS RING GEAR, DIFFERENTIAL/ PINION GEAR, DIFFERENTIAL Traxxas Ring gear, differential/ pinion gear, differential 1/16 scale differential ring and pinion gears (1:16 E-Revo, Slash, Summit) Check the owner's manual of your vehicle to confirm fitment and proper usage of...

Traxxas 47-tooth Spur gear, 47-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential) The 47-tooth center differential spur gear (32-pitch) must be used with optional center differentials 10760 or 10760R. Traxxas spur gears let you fine-tune the performance of...

Spur gear, 46-tooth, steel (1.0 metric pitch) Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more...

Spur gear, 52-tooth, steel (1.0 metric pitch) Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more...

Forward and reverse output gears Includes drive dog carrier Replaces worn or damaged parts

Optional Traxxas spur gears allow you to increase or decrease the final drive ratio and tune for different applications Tough nylon construction for high-power applications One gear per package Includes bushing 70-tooth, 32-pitch

Traxxas Top drive gear, steel (22-tooth) Replacement 22-tooth steel top drive gear for standard Magnum 272 transmission. (Note: Older versions were plastic, this is a compatible steel version for greater durability.) Check the owner's manual of your vehicle to confirm...

Traxxas Servo Gears 2055 Servo Features: Grey plastic and brass construction. Includes: One 25 and 41 tooth output gear. One 35 and 16 tooth gear (gear #7). One 10 and 62 tooth gear (gear #9). One 10 and 50 tooth...

Gear set, transmission, speed (9.7:1 reduction ratio)/ pinion gear, 11-tooth Boost the top end of your TRX-4M™ with this Speed gear set. The gear set features a high 9.7:1 reduction ratio for maximum speed. The set includes all transmission gears...

Traxxas TRX-4m Transmission High Range Gear set (trail)(16.6:1 reduction ratio)/ pinion gear, 11-tooth Replacement part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

Gearbox housing (front & rear)/ 2x4mm BCS (with threadlock) (2)/ 2x8mm BCS (4)/ 3x16mm pins (2) Accessory part for these models: 1/18 Ford® Bronco® 1/18 Land Rover® Defender®

Gear set, metal (for 2065R waterproof sub-micro servo) Replacement metal gear set for 2065R servo. Gears do not fit 2065 or 2065X servos.

Traxxas 5647 Gear 27-T Pinion Gear 0.8 Pitch For 5mm shaft Desert Racer

Traxxas Spur gear, 46-tooth, steel (wide-face, 1.0 metric pitch) This 46-tooth spur gear (1.0 metric pitch) has extra-wide steel teeth for maximum power handling and durability. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear...

TRX-6491R Traxxas Gear, 18-T pinion (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears) Traxxas 18-tooth machined pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let...

TRAXXAS 6489X 16-T PINION GEAR, 1.0 METRIC PITCH, FITS 5MM SHAFT (COMPATIBLE WITH STEEL SPUR GEARS) Traxxas 6489X 16-t Pinion gear 1.0 metric pitch Fits 5mm shaft Compatible with steel Spur gears Includes Grub Screw

Traxxas Gear, 20-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw Gear, 20-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) Traxxas pinion gears let you fine-tune the performance of your...

Optional Traxxas spur gears allow you to increase or decrease the final drive ratio and tune for different applications Compatible with 32-pitch or .8 Module pinion gears Tough nylon construction for high-power applications One gear per package